Solvent recovery - Vertical
Principle of Operation
Solvent Recovery, Solvent Recycling systems are evaporative distillation stills. The waste solvent automatically enters the distillation vessel utilizing the standard vacuum pump provided with the RHS Solvent Recovery Still.
The heated thermal oil recirculates in the distillation vessel jacket. The solvent sludge is heated to a programmed temperature to create vapor. The solvent vapor exits the RHS Solvent Recovery Still and travels through a condenser.
Clean, condensed solvent exits to a storage vessel ready for reuse. This entire process is controlled by a PLC. All Solvent Recovery Systems are covered covered by our five year warranty. We will repair or replace any article proving defective when used for the purpose intended.
Micro Series Production Stills
The Solvent Recovery, Solvent Recycling Micro-Stills series is an ideal solution for users with low to medium volume requirements. The Micro converts hazardous waste into 99.5% pure reusable solvent. CB Mills' Micro Solvent Recovery Systems reduce waste and increase profits.
ECONOMICAL - The Solvent Recovery Micro Product Line allows for a reduction in disposal and new solvent costs by converting hazardous waste into reusable solvent. User-friendly controls and minimal operator attention effectively minimize labor costs associated with operation.
EFFICIENT - The current Solvent Recovery Micro Product Line offers distillation ranges of 100º to 550ºF. A vacuum pump enables you to distill solvents with boiling points higher than 400ºF. The Micro is heated by a convection system; evaporating the waste solvent quickly and uniformly.
PURE RECOVERY - With the Solvent Recovery Micro, you control the “quality” of your reclaimed solvent. When you contract with an outside solvent reclaimer, your solvent might be mixed with other solvents and returned to you in a "blend" of questionable quality.
Please click on the solvent recovery model that matches your output needs from the list below:
| MODEL | Output Gal/Hr. |
| Micro 15 | 1-8 |
| Micro 30 | 6-18 |
Additional information regarding the Micro models can be found in this brochure.
RHS Series Production Stills
The RHS Solvent Recovery Still series is a continuous process solvent recovery stills controlled by a PLC. The RHS converts hazardous waste into 99.5% pure reusable solvent. RHS Solvent Recovery Systems successfully reduce waste and increase profits.
ECONOMICAL - RHS Solvent Recovery Systems reduce solvent waste, reduce the amount of new solvent you purchase, require minimal labor for operation, and reclaim your solvent at typically 2 cents per gallon. Your return on investment is normally less than 1 year.
EFFICIENT - RHS Solvent Recovery Systems distill virtually any solvent. The PLC controls insure that operating set points are consistent. Thermal oil is circulated for efficient energy use and temperature set points range between 100° to 550° F. The distillation vessel is designed to eliminate carry-over and reclaim pure solvent. Vacuum operation during distillation reduces energy consumption by requiring less heat to accomplish distillation.
PURE RECOVERY - With RHS Solvent Recovery, you control the quality of your reclaimed solvent. When you contract with an outside solvent reclaiming service, “your” solvent might be mixed with other solvents and returned to you in a “blend” of questionable quality. With an RHS System inhouse, you reclaim “your” solvent.
Please click on the solvent recovery model that matches your output needs from the list below:
| MODEL | Output Gal/Hr. |
| RHS 30 | 15-30 |
| RHS 55 | 25-60 |
| RHS 90 | 45-85 |
| RHS 150 | 75-120 |
| RHS 250 | 90-155 |
| RHS 850 | ~500 |
Additional information regarding the RHS models can be found in this brochure.